What does the O-ring W stand for: Revealing the key symbols of industrial seals
Recently, one of the hot topics in the field of industrial manufacturing is the meaning of the symbols of seals, especially the interpretation of the "O-ring W" mark. As the core component of mechanical seals, the specification code of O-rings directly affects equipment performance and safety. This article will combine the hot discussions on the entire Internet in the past 10 days, structurally analyze the meaning of "W", and attach relevant data comparisons.
1. Definition of the symbol of O-ring W
According to the international standard ISO 3601 and domestic GB/T 3452.1, the "W" in the O-ring code usually representsMaterial type. The following table shows the comparison of common material codes:
| code name | Material | Temperature resistance range | Applicable media |
|---|---|---|---|
| W | Fluorine rubber (FKM) | -20℃~200℃ | Oils, acids and bases |
| N | Nitrile rubber (NBR) | -30℃~120℃ | Petroleum-based oils |
| E | Ethylene propylene diene rubber (EPDM) | -50℃~150℃ | water, steam |
2. Statistics of hot spots across the entire network
In the past 10 days, searches for O-ring W have surged, mainly related to the following hot events:
| topic | Hot search platform | amount of discussion | Related industries |
|---|---|---|---|
| "Wrong selection of O-ring W leads to leakage" | Zhihu/Baidu | 12,000 times | Petrochemical industry |
| "The difference between W and V materials" | WeChat Index | Average daily 800+ | automobile manufacturing |
| "Breakthrough in technology to replace imported fluororubber" | Industry forum | 5300 posts | Aerospace |
3. Core characteristics of W-shaped O-ring
By analyzing hot discussions, the three major advantages of fluororubber (W type) are the most prominent:
1.chemical stability: The resistance to strong acid and alkali is more than 3 times that of NBR material;
2.High temperature adaptability: Can withstand the extreme environment of 250℃ in the short term;
3.Compression set rate: <15% (under standard test conditions).
4. Selection suggestions and hot cases
A new energy vehicle battery pack sealing incident triggered heated discussions:
| Wrong selection | Correct solution | Effect comparison |
|---|---|---|
| Use N type (nitrile rubber) | Replacement of W type (fluorine rubber) | Leakage rate dropped by 92% |
5. Industry trend analysis
According to recent industry white paper data:
| Year | W-type O-ring ratio | annual growth rate |
|---|---|---|
| 2022 | 38% | +7% |
| 2023 (forecast) | 45% | +9% |
Currently, with the increasing requirements for seals in industries such as semiconductors and new energy, W-type O-rings are gradually replacing traditional materials. Experts suggest that in scenarios involving high-temperature corrosive media, the W-type fluororubber sealing solution should be given priority.
Note: The data in this article are synthesized from ISO standards, industry reports and hot spot monitoring across the entire network, and will be updated in October 2023.
check the details
check the details
en
